Do everything yourself

Tip 1: how to make a wooden katana

Japan has been famous for all times not only by martial arts masters, but also craftsmen who can make the striking examples of cold weapons. One of these masterpieces is the usual samurai two-handed sword - Katana. It is not so easy to make a real katana, and it will be not so easy, but it's absolutely allowed to try from the tree. How to make a wooden katanaYou will need

  • - birch board;
  • - Tools for working with wood;
  • - sandpaper;
  • - Wooden varnish.

Instruction

one. Prepare a dry birch board either bar. Overtee is also suitable or oak sudden. The main requirement for the material for the sword is the lack of wood deficiencies, especially bitch. The length of the workpiece should be about the meter or a little more. The universal dimensions of the upcoming wooden samurai sword are determined by the growth of its owner; Typically, the katana handle has a length of about 25 cm, and the working part (blade) is not more than 75 cm. 2. Take a straight wide blank with the plane. Remove the extra layers of wood; If you use a solid shrub barrel, you should remove the bark in advance and dry the workpiece. Later, the initial processing you should get a strip of a thickness of 10-30 mm. 3. Give the sword a little curved view, removing unnecessary. So that the sizes and the form are not distorted during processing, the silhouettes of the coming weapon should be applied in advance to the workpiece, and after that, with the help of the ruble step, remove the excess material. four. Cut the sharp edges of the workpiece, giving a cross section of katana slightly rounded or oval shape. Special attention is paid by the handle of the sword, from the fact that the convenience of handling of training weapons will depend on the quality of its processing. Immediately will be, if you handle you will make a round or oval cross section. Make sure that the thickness turned out to be identical for each length. five. Later, giving the working part of the rod of the desired form, treat it with a file, and after that emery paper. It will save your hands from the zoom. First, use the "sandpaper" is greater than the big one, transition to more thin grinding. The tip of the katana for safety purposes when handling the projectile, make it rounded and also sew. 6. Cover the finished sword stepped by two-three layers of varnish, in order to protect wood from the harmful effects of the medium. For comfort, the holding of training weapons in the hand diligently wrap the handle of the sword with an insulating tape. Now you can bravely begin to master the art of combat on samurai swords.

Tip 2: how to make Katana

Aura, which surrounds the mythical samurai sword - Katana, supports interest and admiration for this type of weapon for not one hundred years. Katana is a strong, lightweight and elastic sword. It becomes such due to special materials, of which it goes, special forging and, according to the legends, the faithful heart attitude of the wizard. How to make katanaYou will need

  • Iron sand
  • Melts
  • Gorn
  • The hammer
  • Anvil
  • Charcoal
  • Rice straw
  • Clay
  • Sandstone powder
  • Water
  • Tools for grinding and polishing steel

Instruction

one. In order to order a positive katana, we need to stock specialty "black sand" from the Japanese coast. These are glazed sands of which you have to pay Tamahagana - the traditional Japanese iron used for forging samurai swords. 2. Load the ore sand into the melting - Tatar - and pay in charcoal about 4 kilograms of steel. The temperature in the melting furnace should seek 1,500 degrees Celsius. 3. Sore iron on small carbon and high carbon. High carbon tamahagana is heavier, clearly silver color. Low-carbon - coarse, gray-black. four. Cover the bottom of the blacksmith horn with crushed charcoal, add huge pieces of coal and burn them. Place a layer of low-carbon steel and fall off the layer of charcoal again. Wait until the iron fall to the bottom of Horn. five. Cover the bottom of Mountain ash from rice straw. Hunting coal crushed into powder, lay a layer of high carbon steel slide, pour on wood coal on top. Start actively download the mehs. Wait until only iron remains in Mountain. 6. Take the slices of Tamahagana and start to join the flat sheets thick in half a hundred. Cool sheets in water and smoke on plates with an area of ​​2 square centimeters. Sore iron to high carbon and small carbonistic. 7. Take selected pieces of high carbon steel, put on a steel plate with handle. Wrap paper and dear clay. Place in Blacksmith Mountain. Push off charcoal and heat at least thirty minutes to clear yellow or white. 8. Remove the block of the mountain, place on the anvil and plan the hammer. Place back to the mountain, heat and sole. Repeat this cycle several times. nine. When your bar will be ready, make sucks in it and roll over. Rude and treat with a hammer, until the upper and lower half is rolled, and the bar will not return to the initial length. Repeat this cycle six times. ten. Before continuing forging, cut the bar on four equal parts. Fold them alone on your other and weld them together, by heating and forging. Six times repeat the folding, heating and forging. You got the Kavagne iron. eleven. Take the deferred low carbon hardware, snap from it from it and then roll it up and sole it ten times. You have turned "Siniana" or iron core. 12. Snote a flat plate with a flat plate with a length of 40 centimeters from Cavagne, turn in the form of the letter U. Intention to this plate, place the Sinianne broom. Heat the workpiece in the mountain to the clear-yellow color and start tapping. Reach complete welding of plates among themselves. thirteen. Make a blank for the blade, heating the bar in the mountain and pulling out of it a rectangular workpiece. Exercise the blade shape, by stretching the workpiece perpendicular to the length. Form the cutting edge, edge, side ribs and volatile. 14. With a blank scraper, treat the surface of the sword. Fire with a volatile and cutting edge. With the help of Karborund stone, perform the previous grinding of each blade. 15. Prepare the adhesive clay mixture of clay, poured charcoal and sandstone powder in equal proportions. Deliver with water and spatula to the cutting edge. A thick layer on the footage and on the side surfaces and a dipstone thin layer along the edge itself. Wait until the clay is freezing. Drive the blade in Mountain to 700 degrees Celsius and cool in water tanks. 16. Adjust the bending of the blade and polish it. 17. Fire with a blade shank. 18. Finish the production of katana by making a handle from 2 halves of wood, wrapped in the beginning of the skin, and then a cotton cord. Video on the topic Useful advice Learn the art of making ordinary katana is allowed extraordinary personally from a genuine master. There is a lot of subtleties and secrets that are transmitted only from the teacher to the student.

Tip 3: how to make a kana from a tree

Katana - Samurai Weapons in Japan. The art of katana ownership did not lose relevance to this day. But to wave in training a real rod, capable of legend, to cut steel rods, primitively unsafe. The analogue of the material for a genuine samurai sword is permitted to consider the Bulat or more closely in our time again open the special technologies of the so-called "Anosovo" steel. If you decide to explore the ancient art of samurai, set aside the "genuine" blade away to the side. Let it be excellent in detail of the interior. How to make a kana from a tree

Instruction

one. In comprehending the art of ownership of kathana, its full analogue of the blade is applied by its properties called "Boken". 2. Boxen in the form fully corresponds to Katan, but, because It is made tree , then a little easier. Bocken, as usual, make from strong rocks tree , such as oak, beech, hornbeam and similar. In Japan, Boccken is customary to do from the oak White (Shiro Kashi), Red (Aka Kashi), chestnut or black (Chaironuri Kashi). 3. From the fact that the custom of possession of the sword has no one hundred years in Japan, then the training swords also have their canonical sizes, weight and items depending on their schools using them The weight of 102 cm weight ranges from 580 to 620 g, depending on the material. four. Boxed Casey-Ryu is the most weighty of all, with a length of 102 cm weighs 730 G. Garde (cross-lining, guarding the hand from the enemy's arms scoring around the blade) in boxes, as applied, does not apply. five. To give a characteristic whistling sound, with the right arms location when hitting, the Boxed Baskets make a shallow groove, called "hee". 6. Blade blade Basken (as well as real katana) is bevelled at an angle of 45 degrees at the end. Filter Basken, depending on the type, can be flattened-oval or round.

Tip 4: how to make a samurai sword

Sword Samurai is his pride, symbol of courage. The first samurai swords were performed from the hardened iron plates, on the form of resembling the blade. But the iron fastened steel swords. The genuine samurai sword combines the elasticity of iron and steel hardness. However, experts argue that the uniqueness of the Japanese sword is not in the alloy of materials, but in the method of its manufacture. How to make a samurai sword

Instruction

one. In order to make a genuine samurai sword, acquire a strip of layered damask steel. In return for Damascus, any other, belonging to the variety of spring-spring or instrumental and necessarily with a huge content of carbon. The optimal version will be high-alloy iron. 2. Through a huge file, give your strip the rhombid shape of the section, observing all the usual proportions of the Japanese sword. Rib sword drink from the tip to the tip of the shank. Holders stuff only later the final form of the blade from start to the end. Do not make the thickness of the cutting edge too thin. It must be at least 1 millimeter. 3. Clean the surface of the blade with 2 files: one huge and other smaller. Both files are certainly obliged to be new. Move the file perpendicular to the axis of the sword, opposite the surface will appear unevenness. If you do not plan to put the clay on top, then in the end, go through the clinch with a supfyl, in order to give the gloss. four. In order to bring to the ideal of the back line, make a special device. At the twenty-sentimeter wooden bar attach the sandpaper. One side of the bar must be convex, in order to match the sword's deflection. Such an adaptation is similar to the fugue to align the arc back. five. To heat up your sword you will need a huge muffle oven with a deep meter camera. Immerse your sword in the oven actually horizontally, blade down. The same procedure is allowed to do in blacksmithful mountain with the use of coke. Annealing is strictly spent in the layer of ash. To do this, make a close penalty for each length of the strip and split it to orange radiance. Take a sword in a hot construction for 2 hours, later, you will disable. 6. Later a complete cooling, proceed to the final stage of grinding. Through industrial abrasives, leisurely reciprocating movements of the bar on the sword, give him the look of the Japanese samurai sword. Video on the topic

Tip 5: How to Sharpen Katan

Real Katana, being a samurai weapon, is made of certain grades of iron compounded in several layers. But modern katana, as usual, goes from spring steel. Incidentally, the sharpening of the Japanese Nododelov swords has its own characteristics. How to sharpen KatanuYou will need

  • - Katana;
  • - Stones for sharpening;
  • - electric emery;
  • - marker;
  • - protective glasses.

Instruction

one. Take the sword in your hands and mentally divide the blade into three parts. The upper part will require a particular sharp sharpening (it will cut), the average - sharpening under a huge angle (the load will be brought to it) and, finally, the lower part, which is closer to each to the Garda, is sharpened at least (the load is really not communicated) . Make these parts by a marker. 2. First, make a clinch minimal sharpening. To do this, turn on the electrical emery, put on the protective glasses, wait at about one minute while it is entirely promoted, and perpendicular to bring the tip of the sword to it. Light movement, without pressing hard blade to disk emery, swipe the sword right left, then tilter it and spend left to right. Repeat the procedure until we do not feel the finger on the cutting edge of the sharp angle. The same result is allowed to achieve, leading a grinding stone on the blade, but it will take much more than time and strength. 3. Now sharpen the top of the blade. Range again Kanana to the emery, put the blade on the disk. Tilt her like that in order for the cutting edge slightly touched a knifting disk. Movements from left to right and right to left to drive the blade from the tip to the mark of its middle part. By this you reduce the sharpening angle. four. Sharpen the middle part of the blade. The sharpening angle must be 40-45 °. Drive the blade by emery, tightly to him by pressing it - from the mark of the middle to the mark of the bottom described above, until the desired sharpening angle will achieve. Like do with the bottom of the blade. Here the sharpness of sharpening is not so main, the angle of 50 ° will be pretty (but no one takes you to make it smaller). The sharpening of the lower part should end by 2-3 cm from Garda (it will be difficult to sharpe further, and the Garda is easily allowed). five. Now bring the sword to the necessary sharpness with sharpening stones. Initially, evenly spend them for each length of the blade, in order to remove the permissible irregularities. After that, it is purposefully sharpening with steep short movements with all part separately, starting from the bottom. Note! The smaller the alarm angle, the smallest the rustiness of the blade. To cut the solid materials, large alarms are needed, and for cutting soft materials, the alarm angle should be much smaller. Useful advice Later, the rings on the swords on your blade will be inevitably suited (for its preservation, it is canceled to repel the enemy weapon with a flat side of the blade), we decide the procedure for sharpening with grinding stones later than any battle or once a week.

Tip 6: how to prefer Katan

Katana is a long two-hand curved sword with one sharp face. Along with a short sword of Vakidzasi and auxiliary dagger, Tanto, she was part of a rod set of armament of Japanese samurai. Katana was a soul of a warrior, jewelry, family relics and even philosophy. Nowadays, the Japanese culture and martial arts are extremely famous in Russia, the samurai swords are in great demand. Knowledge correctly prefer Katan - it is also an art who needs to learn. How to prefer Katanu

Instruction

one. Decide for what purpose you want to purchase Kanana . This will depend on the dimensions of the sword, equipment and even material. 2. If the sword is needed to you for training, get a boxen - a wooden mock of katana. Bocken must withstand strong blows, it is being made of solid wood grades (beech, oak, horn) and impregnated with varnishes or resin to increase density. With saturated workouts, the sword will last 1-2 years. In Japan, Bokkanam belongs to about the same respect as real Katana. 3. If you choose to train with a real sword, pay the dominant at the choice of katana is not a decor, but sizes and form. Take a sword in your hands: Hold it should be comfortable and gratis. The length of the katana varies from 95 to 120 cm. In order to positively pick up the length of the sword for herself, stand straight and take it for the base of the blade near the Round Garda (Zuba). The blade tip must actually touch the floor. The length of the row of katana (ceuma) should be approximately three of your fist (an average of about 30 cm). four. By purchasing weapons in the present, as an interior decoration, give preference to a set of 2 swords (Katana and Vakidzasi) or 3 (Katana, Vakidzasi and Tanto). It will look more significantly and rich. In the difference from European sabers, corticists and swords, Japanese katanas are not hanging on the wall, they will investigately strictly acquire a special stand. five. In order, Katana took a well-deserved place in the interior, take care of accessories. The distinctive specificity of samurai swords is the likelihood of disassemble them into combined parts. From the fact that the handle is traditionally manufactured from the tree and covered with the skin or a cloth, she rapidly worn and needed to be replaced. Choosing Kanana , purchase an extension kit for its rim (mono-mono). It includes Tsubu (Garda), menuka (handle decorations), Casira and Futi (head and coupling of handles). 6. Remember that behind the samurai sword, as for any other weapon, is needed to really care. You will certainly acquire a special kit for caring for riding. It includes a natural stone powder for polishing, cleaning paper for cleaning, blade lubrication oil, as well as Mekhigitsuchi - tool for extracting wooden nails (mug), which attached the handle. Video on the topic Note! If you want to buy Katan to the present not as an interior object, but for the classes of martial arts, you will certainly come to the store together with the upcoming owner. Finally, surprise will not work, but only the warrior itself will be able to determine whether the sword is correct and it will be convenient to work with him.

Tip 7: How to draw Katan

The Japanese sword of Katana is created within a few months. The process of the Nabol is difficult because the weapon should be a one-time sharp, strong and not brittle. In order to achieve this, the masters are combined in one blade several types of metal. If you decide to draw Kanana And you want, so that the picture was plausible, consider the features of the device of this weapon. How to draw KatanuYou will need

  • - pencil;
  • - paper;
  • - eraser;
  • - Paints / Colored Pencils.

Instruction

one. Draw a straight line. She will serve as the basis of the essay. If there will be other subjects or people in the figure in addition to katana, determine their proportional ratio. Consider the length of the weapon - about 70-100 cm. 2. Enter the line into three equal parts. The top segment denotes the length of the handle. From the fact that the sword must be curved, slightly incarn the drawn cut. The "convex" point is located in the middle of the segment. 3. List the width of the katana. Blade width is approximately 30 times smaller than the general length of weapons. Handle Make a little more wide than blade. The edge of the blade must be bevelled - "Cut" the end of the sword at an angle of 45 °. four. On the border of the handle and blades, draw Garda. This is a metal nozzle that protects the arm of the warrior. Its diameter is an average of 8 cm, and the thickness is 5 mm. You may prefer the form of garda at your own desire - it happens round, oval, quadrangular, polygonal, divided into parts. On the surface of this part of the katana is allowed to depict the thread or edging with non-ferrous metals. From above and from below, the Garda is mounted washers - draw them in the form of thin strips. five. Under and over Garda, draw a strip, top making more close. These are clutches made from brass or bronze. 6. Remove the auxiliary line of construction and draw the surface of all parts of the katana in detail. It is allowed to make a watercolor background in advance, and add pencil strokes on a dried paint. 7. Katana handle must be covered with skin. On top it is wrapped with a ribbon. Motor winding come up with either copy with genuine weapons from photography. Between the turns of the braids is allowed to add volumetric elements of the decor. Closer to Garda, draw a small pin, which is attached to the blade. 8. Katana blade can be made from one or several metals. The most powerful copies are made of strong metal along the edges and more soft - in the center of the blade. Distribute the boundaries of these "layers". Running the blade, determine where the light source is located, and mark the glare and shaded places on the blades. nine. Flooring for katana. Draw in the form of a curved rectangle. In the upper part of it, the cord should be located, which has been done in the loop.

Tip 8: how to disassemble katana

Japanese weapon long ago closer conquered the celebrity in every world. The long sword Katana even got into the Russian weapons of cold weapons, where it was called a two-handed saber. Good made by Katana seems monolithic, but in fact it is allowed to disassemble. Let's say it is recommended to disassemble during transportation. It may appear and need to replace the handle. In addition, the collectors often allowed to see individual parts of this sword. How to disassemble katanuYou will need

  • - a small hammer;
  • - brass spool:
  • - Gloves.

Instruction

one. The sheaths are an inseparable part of the katana. In Japan, they were most often made from the skin of the skate. Now this material is used mainly in expensive models, and for the remaining sheaths make out of all skin, including unnatural. Kanana In the sheaths are traditionally laid for belt-Ob. This fashion arose in the XVII century and was preserved until now. Before removing the handle, remove the sword from the sheath. 2. Cuther (handle) has an excellent katana with support for one or several pins - mugges (in other transliteration - Mercuchi). Pins were usually made from the bamboo and did not paste. Now mowes are made from other materials, and inexpensive models of the handle details often plant on glue. It is about the purchase of katana that needs to ask the seller to disassemble it. Before you start removing the handle, put on gloves. It is permitted to do and one - on the wrong hand, which you will hold for the blade. 3. Put the katana on the horizontal surface. If you are not so sure that the pins will come out easily, allowed to devoid to fix the sword in the vice. But it is usually not done. Put a brass pin with pin to pin. Diligently hitting the hammer on the brass item head, select it. It is also true to choose the rest of the mug. Rarely when it is more than 3 pins, it usually rather the one-2nd. Post down the mug to the side either in a small box, in order not to be lost. Tsuku was taken from the wood of magnolia. Now we often use different plastics. four. Hand in the glove Take the sword for the blade next to Garda. Power in the handle. It should be removed from the shank, the one that is called emerging, with some effort. Remove the coupling feet between the handle and Garda. five. Further detail that you want to remove from the handburn - the SEPPA, the original washer that makes the connection more strong and does not allow the handle to split. That's right, the same SEPP is also the other side of Garda. 6. Remove the Garda, which katana is referred to as the Tsuba. Later, it remains to remove another washer and another coupling that is called Habaki. Occasionally, it is permitted to disassemble the handle, removing some decorative elements from it. But in modern working swords, these decorations are usually removed. Useful advice A short Japanese sword disassembled like and with the support of the same non-hard devices. The hammer should not be much huge. They do not need to knock hard, brass is a sufficiently soft material, and the spool can be deformed. Objects for rods are allowed to purchase in the same store as the sword itself.

Katana - Japanese samurai weapon. The samurai handling techniques have been preserved to this day and are not losing popularity. Katan Obredravel was made from Bulat - "Anosovo" steel, but it is dangerous to fight such a tool, so I will postpone the original samurai weapons, let him decorate the interior.

How to make a kana from a tree

If you decide to study the ancient art of samurai, then the Boxen is perfectly suitable as a training weapon - the wooden analogue of the blade. "How to make a kana from a tree?" - Many asked such a question, but only a small number of samurai owned a wooden boxed appliance.

Features of wooden katana

Japanese culture is rich in tradition. Not one hundred years of training swords are used in samurai art. In the East, there are many schools studying martial arts. Depending on the ownership of a school, the sword Basken has its own parameters and name. For example, a white or red oak tree uses for the manufacture of Boxen Bokuto. The length of such a blade is 102 cm, and the weight varies within 580-620 grams. As for Boccken Casey-Ryu, then such a weapon is more impetuous and at its length in 102 cm weighs 730 grams.

Boxen - an exact copy of the rod, made of wood, which is updated time to study the samurai craft. Having learned how to make a kana from a tree, you will be surprised, because this process does not differ in consideration.

How to make kanana with your own trees

Boxed shape completely duplicates the shape of the katana, but due to the material used to produce weapons, weighs less. How to make Katana with their own trees and get a quality product? Select the material correctly. For the manufacture of boxes, the tree of such breeds mainly use:

  • oak: white, red, black, brown;
  • beech;
  • hornbeam.

Wooden Boxen Blade, like real katana, at the end is beveled at an angle of 45 оAnd the Blade's profile has a flattened-oval or round shape. It depends on the type of weapon.

A distinctive feature of samurai boxes is the lack of a garard, a cross overlay that protects the arm from the opponent's gliding along the blade. Along the entire blade blade make a shallow slot - "hee", thanks to which the boxen with a strike makes a characteristic whistling sound.

How to make a wooden katana

Today you will learn how to make a katana from a tree, following a simple instruction.

Holding a samurai sword training takes place with a boxer, so the need for the manufacture or purchase of this tool is so common.

Step by step guide

  1. To start work, you will need a drawing. You can draw an exemplary rod drawing or download a ready-made template from the Internet.
  2. Having made the workpiece, start processing, starting with the handle. Treat the place under it using a file and a ruble.
  3. Give the blade form, removing the excess tree by the template using tools.
  4. Round the tip and gradually grind the corners of the handle.
  5. Collect the handle and blade using sandpaper.
Drawing of Katana

Optionally, you can cut and attach Garda, but in your largest boxes are made without this item.

Now you know how to make a kana from a tree. It turns out that it is not as difficult as it could seem. Certain with such a task can even begin in this matter.

Today we learn how at home, with your own hands to make a wooden samurai sword Katana (Boken).

How to make a wooden katana at home

Boxhene is used for samurai sword training, he will also be an excellent decorative decoration for your room.

So, proceed. If you are supposed to use our workout product, then the material for the workpiece is better to choose solid wood - oak, beech, housing.

  • On the bar, draw an exemplary contour of our future katana with a pencil. Let's start with the handle - the place under it process on the contour with a file or a branch.
  • Next, in the same way, give contour the blade, removing the extra tree to the lines that we ran.
  • Further, we give the rounded shape to the tip of the blade and smooth the corners of the handle, giving it an oval contour in the cross section, we remove unevenly sandpaper and make it smooth.
  • Also emery paper, the blade is flat, so that it is flat, with an effort leading by sandpaper along the entire length of the blade.

It remains to make Tsubu - Garda samurai sword. Blacks on a sheet of plywood circuit zuba, drinking his jigsaw. The size of the center opening can be determined by applying the garlace to the handle and making the marks where the edges should be. We connect the labels by the pencil rule, we make the hole with the drill and the jigsaw, cut the center of the zub, spin the edge, so that they approached the handle on the radius, put on the tsubu on our katan, fill it, for example, superclaim.

Wooden Katana Production Scheme

Stock Foto Catabase production scheme

Video

So we made our own hands at normal home the similarity of the samurai sword from the tree. After it is made, it is advisable to soak it with wood resin or varnish. The videos contains instructions for the manufacture of this product, looking at it, the Boxen can even make newcomers.

Genre of the article - Japanese weapon

How to make a wooden katanaIn this master class, we told about how to make a wooden katana personally. If anyone does not know, this is a samurai sword. Kanana can be called the Golden Middle Japanese Swords. As you probably guessed, we mean size. So, the wooden katana is simple in creating, in which you, strictly speaking, and make sure that this manual.

Primarily

Start the assembly of everything you need.

You will need the following:

• Birch board; • saw; • Fuganok; • acute knife; • sandpaper; • varnish; • brush.

Note, if you want to learn about these swords, more and even more so if you have a desire to buy a real katana, you should visit the site located at Swordmaster.ru. The Katan Shop This is presented there. The range in this store is huge, and prices are relatively low.

How to make a kana from a tree

Let's just say, the length of the blade of the sword must be 75 cm, and the length of the handle is 25 cm. In addition, we cannot help but notice that in this case you can use absolutely any wood, the main thing is that it is durable and dry. Of course, it will be better if you greet the katana from birch, oak or from other similar wood rocks.

Start by deleting too much. Hard to work for glory. The width of the workpiece should be 30 mm. Remember that the blade will be much more subtle than handle. Stip carefully, in order not to damage the workpiece. When the case is done, proceed to more detailed processing.

Detailed completion of the workpiece is even more delicate case than creating a blank. First use a sharp knife, then we advise you to apply sandpaper or grinding machine on wood. As for the simply handle, it can be a whole one-tree, and dressed in some other material. The fact is that the handle can be covered with skin and even a cloth. True, in the case of a wooden sword, in fact, a toy, a drawing of the handles is unlikely to be called a suitable check.

At the final stage you need to perform finishing grinding at least the wooden sword blade. Then cover it in advance with a prepared varnish. By the way, you can always apply the paint or something else. In addition, we note that you can do not handle wood at all.

So, actually, all. As a result, you will get a very good wooden Japanese sword, with which it will be safe to do. Such a sword can be done, including son. Children love swords, and indeed toy weapons.

Katana is a Japanese sword. Of course, we will not disassemble the manufacture of real weapons, it is rather like a tree of wood. The product has no sharp corners and it serves as a toy.

Tools and materials:

-Fanener (1 cm x 1 m x 2 m);

-Mill (1 cm x 25 cm x 15 cm);

-Decoration Materials;

-Blower;

-Electrol bzizik;

-Shelifmashinka;

-Marker;

- Check;

-Mary tape;

-Store glue;

- Rinel.

Step One: Blade

At first the master statched and cut the blade from plywood. The size of the blade is 76 cm, handles - 28 cm. The blade thickness is 3.8 cm. The shape of the katana is curved and with a small tip.

Step Second: Garda

Sticks paper template on the board. Cuts the harvesting of Garda. Places and cuts a rectangular hole for the installation of Garda to Katan.

Sets Garda to the billet of the katana.

Step Three: handle

Now you need to make a lining on the handle. The master marks two rectangles. The milling cuts part of the material inside the blanks.

Prints overlays to the handle.

Step Four: Grinding

The further grinds the blade and the handle.

Pitch Fifth: drawing

Split and grind distressed places.

At the entire length of the handle draws 18 triangles. In the handle draws 9 rhombuses.

Now it remains to paint triangles and diamonds, apply a varnish on the product and everything is ready.

Source (Source)

Become an author of the site, publish your own articles, descriptions of homemade with payment for text.

Read more here

.

Новости

Добавить комментарий