What kind of laminate is better, with a faster or without + ways of laying, reviews and photos of buyers

oneAmong the flooring applied in any premises - residential, public, trading halls are the most common laminate.

It is the most universal, has a lot of advantages, easy to maintain and install.

The imitation of natural materials is so good that many will prefer them with the laminate, as it makes it possible to save multiple times, but get the result at the highest level.

All the advantages of the material is made to shit in one phrase: the laminate does not tolerate the contacts with water.

This is not entirely true, as moisture-resistant samples have been produced long ago, and completely waterproof material types, indifferent to moisture.

There are various coating models that differ from other presence of any specific details.

Consider an interesting type of material - laminate with a chamfer.

What is his difference from ordinary laminate

The laminate consists of certain oblong rectangular panels, the edges of which are equipped with a lock connection. The lock allows you to connect the panels in the canvas of any size that can cover the floor of any area.

The chamfer, which is available in some samples of the material, makes the side compounds more distinct, expressed, giving the canvas the appearance of the board . Some models have a chamfer on all parties, highlighting the structure of the panel in the canvas, eliminating the effect of "endless floorings".

The appointment of chamfer lies exclusively in a decorative, aesthetic plane. It adorns the canvas, makes it a more natural, natural.

At the same time, there is a certain practical effect, expressed in the fact that the edges of the panels after contact with moisture, if climb, it is unnoticed, which allows you to preserve the appearance of the dense and increase the service life of the coating .


Laminate with a chamfer is not some separate, selected coating in a specific group. These are simply panels of various species having a decorative element in the form of a bevel on the edges. No practical qualities of the chamfer gives, it's just a decoration. At the same time, some experts argue that the chamfer is able to increase the service life of the coating 2-3 times, which is not yet officially confirmed.

Photo of laminate with a chamfer in the interior:

2. 3.

What is better - with chamfer or without?

Since there are no fundamental differences from the panels with the favry, it is definitely, which type of material is better, it is impossible. The choice is due to the personal taste and the preferences of users, and about tastes, as you know for a long time, do not argue.

That for some is an advantage, others perceive as a significant drawback, no rational arguments of this situation . In addition, there are types of laminate, for which the presence of chamfer on the panels is a significant disadvantage, for example, white or glossy types of material.

It can be said that summarizes that for all types of coating, winning in the canvas of a large area, the presence of chamfer is contraindicated. Conversely, for samples with a bright personality of each panel, for example, for matte samples under a tree or stone, the presence of chamfer only will emphasize the texture and naturalness of the material.



Laminate classes are categories that determine the degree of strength or, more precisely, the wear-resistant panels. It should be borne in mind that only material made by a member of the Association of Laminated Coatings can only have a durability class. .

In any case, the formal strength class is assigned only to these companies. Initially, such companies were 22, but today their number is much larger.

However, the classification of laminate turned out to be very convenient, it allows you to determine the degree of stability of a particular material to wear. Mechanical load m with other impacts.

The only thing that grave does not determine directly is the degree of moisture resistance, which has only an indirect numerical expression. The convenience of such a classification forced other manufacturers to selflessly install one or another class of strength for their products, sometimes completely unjustified.

This is especially typical of manufacturers from Asia, seeking to promote their goods in all ways.

Today, three main class of strength is used. :

  • 31. . This material is least resistant to loads, it can be used in apartments or small offices with low attendance.
  • 32. . The most common class having the most wide selection of color or panel textures. Its popularity is caused by relatively low prices with good performance, well-related apartments, office or medium-sized store.
  • 33. . High laminate strength class created for use in large stores visited offices, bars, conference rooms, etc. The cost of this type is the highest of these three classes.

In addition to these, there are another 34 class, educated spontaneously. He was officially not approved, although the discussion of the possibility of its introduction to the classification is conducted. This material is suitable for use in any conditions, for example, in sports halls, public or entertainment buildings with high load, in large stores .


The presence of a class on the label in the store is not yet a guarantee of its authenticity. When buying a road with a high 33 or 34 class, one should not be ashamed to ask to show Certificates and other documents for laminate, which should be available from the seller. If there are no such, it is better not to risk and not buy a dubious product.



Laminate with a chamfer can belong to any class of strength, so there is a very wide range of technical characteristics.

Consider the most common parameters :

  • Thickness - 7-12 mm.
  • Length - 1260-1380 mm, maximum - 1845 mm.
  • Width - 185-195 mm, maximum - 330 mm.
  • Type of lock - Lock or Click.
  • Warranty period - from 5 to 15 years, depending on the manufacturer.

Some material parameters are specific indicators for each manufacturer, their values ​​can be significantly highlighted from the total row. .

Main manufacturers firms

The main manufacturers of laminate with the Fame enter the following firms :

  • Balterio.
  • Egger.
  • Haro.
  • Kaindl.
  • Kronospan.
  • Kronotex.
  • Pergo.
  • QUICK-STEP and many others.

It should not be focused on only the name of the company, you should not consider documents for the material to protect yourself from the acquisition of fake.


What premises are best suited

The presence of chamfer on the laminate panels does not make it some special material and does not impose any restrictions on its use. The use of material is mainly determined by the wispidity class and the degree of moisture resistance to which the chamfer does not affect .

The only advice that may sound in this regard can be a recommendation to use this type of material in rooms with a large floor area, where its decorative abilities will be able to reveal more.

What are the methods of laying

Since the chamfer makes the compounds of the material well noticeable, the laying options for such a laminate are greater than the usual. The chamfer makes it possible to form the panels of various patterns like a parquet set.

There may be a traditional Christmas tree with a connection of panels at a direct or acute angle, direct laying of the rotor or correct rows. (If there is a chamfer throughout the perimeter of the panel).

The choice of this or that option is influenced by the technical possibility of performing the work of this kind, the availability of skills, the taste of the user. It should, however, take into account that all patterns on the floor require a large area and relative to the free surface of the coating, which gives the opportunity to consider and assess the idea of ​​the owner.


Choosing a substrate

The substrate makes coating silent and reduces its wear due to loosening panels. Rightly laid substrate eliminates the roar from movement over the surface of people or animals, the correct air exchange material organizes.

The selection of the substrate material does not affect the presence or absence of chamfering on the panels, since these questions are not connected with each other. The substrate is selected based on the needs of the room, the capabilities of the owner, the presence of the floor below the residential premises, etc. .

All these parameters in combination and allow you to stop the choice on one or another form of the substrate. Specialists recommend cork material, it has the ability to skip water vapors and does not create opportunities for the appearance of fungus, mold or rot.


Nevertheless, foamed polyethylene or other types of material will be a good choice, the main condition is their specialization as a substrate for laminate.


Technology laying

Laying the laminate with the faustr is practically no different from the installation of any other type of coating and is determined by the type of lock.

Procedure :

  • Training . The surface of the draft floor is cleaned of dirt, old plinth is removed, the surface is carefully examined. The discovered protruding nails are clogged deeper with Dobochnik.
  • The substrate is laid on the draft floor but. It must be laid as smoothly, without folds or wrinkles. Hump ​​gaps or gaps should not be. The substrate bands are fastening with a scotch strips, on the wooden draft floor they can be mounted in a stapler.
  • Laying panels begins along the wall from the corner . The distance from the panel to the wall should be 4-6 mm, this clearance is needed to compensate for thermal extensions. Depending on the type of lock, the first row is either assembled into a solid strip by longitudinal docking the desired number of panels, or they are joined by one place.
  • The second number of panels is also collected immediately, or is dialing on one panel . The addition of one row to another is made according to the design of the lock. Most often you need to attach the panels at an angle of about 45 ° and enter the locking mechanisms. Then, with a light pressure, the panel falls into a horizontal position. The lock at the same time is finally snapped with a characteristic sound.
  • In a similar way, all the canvas coating is assembled.



Owners are collected from different sources, because none of them wrote exactly the presence of chamfer. Here is some of them:

Author's name Buyer review
Grigory A. At first it seemed to me that the chamfer only interferes. Wife persuaded. Now the opposite is pleased, the floor looks like a real one.
Victor T. Many say that the laminate with the fancy is bad that the water is going to the water, dust and dirt. All nonsense. First, the floors wash not every minute, secondly, they are so wash, there is no dust and dirt there.
Irina G. Immediately wanted a laminate to as separate junctions. Very cool, looks beautiful, like real.
Leonid J. At first there were doubts, they thought that the coating would quickly begin to deteriorate from behind the chammere, there is a castle nearby. For 2.5 years already has a material on the floor as new. No problems look very good.
Timur K. I recommend everyone to take a laminate with the chamfer! Especially if he is light! Otherwise it will look like a plywood floor.
Artem I. Those who say that the chamfer is a dust collector, partly right, there is such an opportunity. But this is if not to clean and wash the floors. Where they care for the coating, there are no deposits in the yam.
Sergey V. Laminate with the chamfer is much more beautiful and more strware than the usual one. This chamfer does not give any particular advantages, but the beauty and some nobility floor adds, nice to look and walk.
Oleg N. From the point of view of the beauty of the material of the chamfer, it divides the coating on the strip, as if real boards lie. But from the standpoint of durability there are doubts, there is also a problem with the Castle, problems with it are possible. We have such a coating for about a year, nothing has not yet happened, but there are doubts.
Diana M. She herself did not bought a laminate with the chamfer and another will not advise. In my bedroom there is an ordinary laminate, so he visited everything around the edges, and there are 2 millimeters to the castle. If the chamfer is lowered to the lock itself, then the entire joint can collapse very quickly. Let them say what they want, and I will not buy it for anything.
Ruslan Sh. Do not listen to drawing tips, all the same all laminate is different and people are different. I like the laminate with the fabric, he lies everywhere, there are no problems, it looks very beautiful. 4 years already, or a little less. And my floors regularly, and something shed there, nothing terrible happened.

Judging by the user's opinion, the main argument against the chamfer becomes the proximity of the edge to the castle part, and most people are simply not confident in the ability of such a material to withstand cleaning and contact with water. All concerns are in vain, in this regard, the laminate with the Faist is practically no different from flat types of coating ...


The chamfer on the panels of the laminate gives it a stylish and solid look, the surface of the canvas becomes more natural, looking like a flooring from noble wood varieties. In addition to aesthetic advantages, no special changes in the chamfer brings, the parameters and the quality of the material do not deteriorate at all.

All concerns that the grooves and water will begin to gather in the grooves, it is boring, since the depth is 1-2 mm, which is not completely noticeable when cleaning, it does not affect the operational properties of the panels. It is necessary to consider the sites as decorative elements, underline the texture of wooden flooring and decorating the coating canvas.

In contact with




Laminate markedly facilitated the laying of the floor covering, aligning the best qualities of natural and artificial materials. A variety of types of laminated board requires a thorough approach to the selection of the desired option. Lamins differ in production technology, drawing, thickness, can have smooth edges or bevelled. Such a beveled edge is called the chamfer. As far as it is convenient for work, whether the styling prevents, or on the project you need a regular form of the board - in each case to solve you. And it is easier to make a choice, compare the pros and cons of these types of coatings.

An example of a laminate with a chamfer in the interior
An example of a laminate with a chamfer in the interior

Laminate with a chamfer is somewhat more expensive than the usual due to the more complex processing of edges and additional technological operations. In addition, it is done on the lamellas with a thickness of at least 10 mm. Therefore, such a coating is more durable. In the photo in the interior it is clearly seen that the usual laminate has a smooth surface, the connection line is almost invisible. The decorative edge does not cause special hassle during installation, but it looks very impressive after the final finish, creating a kind of real militant floor, parquet or tiles.

Fame of laminate: what it is

Using natural wood as an outdoor coating, quite often the edge of the boards is treated on the milling machine, making it a bit mad. It helps to make less noticeable slots, which over time appear between the floorboards due to the natural drying of the tree. Laminate during operation is almost not deformed, but the edges of the lamellae can also be processed by giving them a certain form. The practicality of this will not change, but there will be more opportunities for the finishing and decorative function.

Lamination chamfer and castle layout
Lamination chamfer and castle layout

Laminate chamfer is circumcised at an angle edge of the panel (SCOS). Get it on special equipment in two ways:

  • The finished boards are passed through the milling machine, which cuts the edges to a depth of 2-3 mm at an angle of 45 degrees. The resulting SCOS can be either simply polished, or additionally covered with a protective layer of paint, varnish or laminating film.
  • Another way to receive chamfer is rolling. The lamella refills in the roller machine. With its pushing, the rolls located on the sides are very squeezed by the edges, giving them a curly shape. Lamination is not violated, no additional protection is required.

Accordingly, the better the edges of the laminate will be treated, the longer it serves without visible defects.

Why it is needed

Building materials are purchased under the finished estimate, even at the design stage, the master knows which laminate it will be required. Choosing models with facilities, it takes into account their properties and features:

  • The chamfer decorativity is well known, its ability to imitate the surface of natural wooden boards. Laminate without it is an even artificial coating.
  • A double-sided chamfer visually lengthens the linear dimensions of the room, especially if we put the lamellas along the long wall. If the slice is applied on all four sides of the board, then such a coating visually makes the room spacious.
  • However, the chamfer has a protective effect, decoring various irregularities that occur during installation. It covers the castle compounds from dust and dirt entering, and when weakened, it makes imperceptible gaps.

Useful qualities of laminate with treated edges are indisputable. It has a long service life, and all small defects, chips, cracks, inevitably arising during this time, are successfully disguised by the formative grooves. It is impossible to underestimate and the decorativeness of this popular material. Depending on the drawing of the laminating film, the floors acquire a respectable view of the marble tile or an expensive oak parquet from a solid massif.

Types of beam

With chamfer or without chamfering: what laminate to choose

Only appearing in the construction market, the laminate has gained unprecedented popularity due to attractive appearance, affordable price and light installation. For a long time, the lamelles were traditional thickness and when laying created a smooth smooth coating, without noticeable seams and connections. The increase in the thickness of the planks led to an extraordinary solution - the edges processing with a milling machine or rolling. Such a need arose due to the fact that over time the locks weakened, the connection was not so dense, the gap appeared. The grooves that were formed between the panels with the chamfer successfully disguised the distance between the traveling lamellas. Plus, the coating gained a noble type of real wooden floor.

Using various ways, you can get two varieties of edge cuts:

  • The V-shaped type is formed with a milling corner in 45 e with respect to the surface. When connecting two bands between them, a groove is formed a depth of 1 to 3-4 mm, at the bottom of which the edges are tightly closed and do not pass to the locks or moisture or dirt or garbage.
  • With the curly processing of the edge that we started relatively recently, the edges are obtained by rounded, U-shaped. This type is rather decorative purposes, the floors look as if they were messed out of the wood array.

Chamfers are also divided into:

  • Small, with a depth of grooves 1-2 mm and even less (microphic);
  • deep when the recess in V-shaped reaches 3-4 mm, and in U-shaped - 2-3 mm;
  • Uneven - the edge of the chamfer looks uneven due to the relief imitating a natural tree.

Microfasis only slightly denote lamellas, deeper - outlined borders, creating the illusion of the militant floor.

Varieties of beam
Varieties of beam

Even with a very dense connection, the locks are often left, and over time they become even wider. This defect is especially noticeable on white or bright laminate. Decorating the slots and microscopic defects, the chamfer will help to shine a novelty for quite a long time.

Each type of laminate has advantages and disadvantages. The laminate with the V-shaped type will cost a little cheaper, but on it, noticeable defects are formed on it. The U-shaped chamfer has greater decorativeness, but when laying such lamellas is required to monitor the pattern, which leads to the overflow of the material.

From which chamfer to choose a laminate?

Both varieties perform their main function, decorative, and slightly mask small defects. But there are differences. They are connected mainly with the method of processing lamellas.

  • With a V-shaped chamfer, a cut surface requires additional protection. It is painted, covered with varnish or laminate. But the strength of the applied coating is different. Cheaper models are crossed, with long-term operation, the paint loses its properties, so the edges can crumble, small chips appear, especially in the corners. This can be called a relatively serious disadvantage, from which you can leave if you do not save at the cost of the coating.
  • Lamination of cut - an additional complex operation in the production of artificial sex. It increases the price, but within accessibility. But the lamellas with V-shaped cuts will be rejected for a long time in a continuing state. This should be considered when choosing.
  • The U-shaped profile with smooth round lines looks very attractive. Plus such trimming - when rolling edges, compress together with the laminating film. Therefore, lamellas do not require further processing to ensure greater conservation of the edges. But this is an advantage and increases the cost of production.
  • The chamfer in the form of the letter U will give the floors the necessary respectability and gloss. Such a laminate in appearance will completely replace the oak parquet from the wood array, and will serve much longer than the usual one.

Various processing of edges does not depend on some kind of one species, but to make a decision depending on the interior design. After all, the main function of laminate with the chamfer is decorative. However, bright shades are better to choose with the treated edge. Even small chips are well noticeable on such boards, the presence of a groove responds attention to itself and hits the light defects from the attentive eye arising over time.

An example of light (top) and dark (bottom) laminate with a chamfer
An example of light (top) and dark (bottom) laminate with a chamfer


The treated edge of the laminated board is necessary to simulate the same coating, but from natural wood. Laminate is much cheaper than natural nuts or pines, and in this form, they replace them perfectly. Cut from two sides of the chamfer visually lengthens the room if the panels are stacked along the long wall. Four-sided treatment leads to a visual increase in the area, the surface of such a laminate becomes similar to the dear oak parquet.

The second largest application of the chamfer is the ability to hide small flaws and defects on the laid coverage. Even if the locks connect two boards tight enough, over time the attraction force weakens, crevices appear.

Other chamfering benefits:

  • To draw the appearance of such clefts, to make them less noticeable;
  • Level a small difference in height between two adjacent lamellas;
  • Protect the angles from the appearance of chips, especially with high mechanical load.

It should only be remembered that the chamfer is not a panacea. If the base under laminated coating was made casually, with irregularities and a noticeable difference in height, then the presence of grooves will not save from rapidly loosening locks. With constant mechanical load, they will be discouraged, leaving wide gaps between the floorboards that will not be able to hide.


Many shortcomings of the Laminate with the Fame at closer looks are far-fetched and do not pose a serious danger during the operation of a popular outdoor material. Among users there are various myths and prejudices that are easy to dispel using practical advice.

Myth 1. The presence of gaps between the panels complicates the cleaning, the dirt is stuck and is poorly removed by ordinary means. Reality . With microphache, the depth of the gap is only 1 mm, which eliminates the garbage from entering it. With cleaning deeper grooves perfectly coped with a vacuum cleaner or a wet rag.

Myth 2. It is impossible to lay a laminate with the champper indoors, where water is possible to enter the floor. The recess increases the wet area, which leads to the deformation of the panels. Reality . The edges of the lamella are treated with water-repellent composition or lamination passes, in extreme cases, the cut is covered with wax or varnish. Therefore, water to such coating is not more terrible than the usual one.

Myth 3. The presence of chamfer makes laminate more fragile, with mechanical stress, uneven edges can break, chips and cracks appear. Reality . Milling processing of edges are made from panels, the thickness of which is 10-12 mm, the same rolled through the rollers. The chamfer 1-3 mm depth looks very modest compared to the size of the board, so its presence does not affect the strength of the laminate.

Myth 4. There is an opinion on the increased complexity of the installation of laminate with the chamfer. Reality . Castles and latches on all types of this material are identical and have a standard design. So on the quality and speed of laying it does not affect.

There is only one disadvantage: models with decorated edge are more expensive.

If you wish, you can combine simple laminate in one apartment and with a decorative edge, laying them in the most suitable rooms. The best are Products of the 32nd and 33rd classes With reliable latches from well-known manufacturers. They form a durable smooth coating without gaps. The design of fixing devices does not give panels back for quite a long time, so the presence of chamfering in such models does not play a significant role.


Fundamentally styling of laminate with the chamfer is no different from the usual
Fundamentally styling of laminate with the chamfer is no different from the usual

The purchased laminate must be kept indoors where it will be laid from 12 to 36 hours. This is due to the ability of laminated panels to change their parameters depending on the ambient temperature and humidity. So after laying the floors are not deformed, and this excerpt is needed.

Floor preparation It is performed under standard requirements for any coating. The finished surface must be rigid, dry, clean, with permissible height differences in the range of 2 mm per 1 square meter area.

Small nervousness of the chamfer will hide, but with serious flaws, uneven load on the floor will increase. This will lead to premature weakening of the locks and the appearance of slots between the boards, the quality of the coating will deteriorate.

From possible errors will save the exact following instructions for steps:

  • Floor preparation (Alignment, Pouring T.P.) Strictly by horizontal level with differentials within +/- 1 mm;
  • Installation of the waterproofing layer - on a poured solution and a carefully dry floor is a solid sheet or wide bands of a polyethylene oxide, with a reserve of 15-20 mm bonded by tape;
  • Next layer - Substrate in roll or in tiles . She puts the joint into the joint so that the edges did not form thickens, capable of affecting the quality of the finishing finish. Creap the material can also be tape;
  • Laminate is laid at a distance of 5-7 mm from the wall. Temperature gaps are necessary to compensate for possible fluctuations in the size of the planks due to changes in room temperature and humidity;
  • The first board is putting a protrusion to the wall in the far from the corner of the room. Before docking with the next strip, the lock can be lubricated with special glue and snap.

Laying scheme May be different, depending on the project. At the same time, it is often often to preserve the pattern of the floor, it is necessary to purchase the material in the amount of more than the overall area of ​​the room.

Read more How much to take the material of the material described in the article "Calculation of the number of laminate on the laying scheme with examples"

Visual effects from the use of different laminate laying schemes:

  • Lamanes with double-sided facilities, laid along a long wall, visually lengthen the room.
  • If the floor project requires a drawing of an oak parquet or granite tile, then it is better to take boards with a four-sided faceted. Bonus - visual increase in the room.
  • Diagonal laying visually expands the space and hides the lack of planning.

Optionally, the installation of panels can be made with a 1/2, 1/3 or 1/4 shift. This technique It implies the use of cropping to start a new row.

Visually, the chamfer is capable of several trimmed by the binding irregularities and height differences. But during operation, these flaws will very quickly know about themselves. There will be an additional load on the lock connections, which will adversely affect them. Castles will break, protruding places will be erased, and the boards will be discouraged so that no chamfer will hide this defect.

How to wash a laminate with a chamfer

Cleaning laminate with decorative chamfer
Cleaning laminate with decorative chamfer

The color gamut of laminated coating is quite wide, from almost white to almost black.

  • On the gray laminate with the chamfer almost imperceptible small irregularities of the edges, small chips and defects. This color is preferred when laying floors in offices, cabinets, other public spaces.
  • For an interior in the style of High-tech and Provence, light shades of the floor are preferred. Such a coating successfully fits into the setting with white furniture and the same walls. For better imitation of expensive wood, laminated boards must have cropped edges.
  • However, consumers are sometimes inclined towards darker shades, thinking that behind a light laminate with a faster is more difficult to care for.

There is a philistine opinion that the grooves formed by the chamfer are quickly stuffing garbage and dirt, remove which is quite difficult. These buyers justify the choice in favor of laminate without chamfer. However, in practice it is easy to make sure that the panels are dirty equally, regardless of the color and availability of grooves. The leading brands producing laminate with a bevelled edge are processed by its water and dirt-repellent means, which in principle removes this problem.

Housewives and employees of cleaning companies, who, by the nature of the activity, are quite often dealing with cleaning, do not find Nothing hard in cleaning laminate with fancy. The broom is really difficult carefully reducing garbage from the grooves in a depth of only 1-3 mm. But the vacuum cleaner with this task copes brilliantly. And for wet cleaning it is better to use modern mop with a special nozzle.

Moisture resistance coating With the fame, it depends on the quality of its processing. In cheap variants, cuts are simply painted under the main color, the paint is quite quickly surrounded, and the water penetrates freely in the pores, starting slowly destroying the floor. If the company in the manufacture of laminate with the favor will correctly comply with the technology (laminate, and not paint sections, use water-repellent impregnations, etc.), then the moisture resistance will be at the height, the boards will retain their operational qualities for a long time. However, such operations increase the cost of production, respectively, the cost of such material will be higher.

In order to completely avoid problems, it is possible in frequently visited zones - in the hallway and in the kitchen - use laminate without chamfer.

The cleanliness in the house is absolutely independent of which laminate is laid in the rooms - from the facilities or without, light or dark.

Laminate with a fabrication or without - what better?

Laminate from the fabric and without: What do you choose?
Laminate from the fabric and without: What do you choose?

Nevertheless, what give priority when choosing a laminated flooring? To finally decide on, buying a laminate with a chamfer or without, we must once again recall what they differ.

  • Technology laying. The presence or absence of the treated edge is practically independent. The only accent - the chamfer is focused on decorative design. Therefore, the installation of such a laminate should be made not by calculation, but according to the design of the designer. It is possible to overfers the material, but in the end it will turn out stylish and beautiful.
  • Cost. Milling or rolling of laminated boards is additional production operations to increase the finished product. In addition, the chamfer is made on the panels with a thickness of at least 10 mm, and the thicker the board, the more expensive it is. The plus is going to pick up the edge of a V- or U-shaped form, thorough cutting cutting with water-repellent composition, lamination of the surface to protect against damage.
  • Laminate care. Practice has shown that any sex is dirty is equally, just for washing floors with grooves requires modern household appliances. And you do not need to leave water on laminated panels, it will worsen the condition of even any laminate, it does not matter with a chamfer or without.
  • Wear resistance. The studies have shown that the processing of the edges of the laminated board does not affect the strength of the coating, unless it uses the blanks with a thickness of less than 10 mm. In this case, ordinary laminate will hold longer.

Conventional laminated boards create a smooth smooth surface with low compound seams. Very convenient in small rooms and in cases where it is necessary to decorate the room with floors with imitation of solid granite, marble, wood. The cost of such a coating is noticeably different from expensive natural materials.

A narrow laminate with a fan width of 9-15 cm is difficult to distinguish from the parquet board, when laying in a small room, it visually makes it wider. The same effect is made by the lamellas of a light shade without chamfer, but at the same time the coating will be perfectly smooth, without visible seams and connections.

Several examples of a photo of light and dark laminate with a chamfer in the interior.

To talk about what laminate is better with the fabrication or without it - incorrectly. Each has the unique properties that have made it very popular, with a relatively low cost. The presence or absence of chamfer is more affected only on the appearance of the floor, and not on the technical characteristics. Therefore, the choice may depend only on the value of the material and the interior style proposed by the designer.

And whatever laminate you bought for your room: from the fabrication or without?

This article will help answer the question and decide: laminate with a chamfer or without chamfer - which is better to choose in the apartment. The first laminated floors were manufactured without the presence of bevelled face and acute choice in quality and reliability did not stand. What was the floor covering, so laid out. The decorative sprung edge around the perimeter from four sides, designed to make the coating elegant, appeared much later.

Dear readers, at the end of the text, I will make links to laminate with a chamfer and without chamfer with links to stores.

Even working in 2000 by the seller in the flooring of flooring and interior doors clearly remember the absence of laminate with a beveled edge. So the time has flowed as your own about relatively recently. In 2001, UniLin brings a product with a triangular groove.

Laminate with fistalLaminate without chamfer

What is the chamfer and what it happens on laminate

The chamfer on the laminate is a decorative element. It is made on panels in the form of a single-band board for complete imitation for a massive parquet of solid valuable wood.

Lerua Merlin Laminate with a chamfer

Lerua Merlin laminate without chamfer


Without chamfer - Petrovich


The chamfer is found in two types:

  • V-shaped (formed due to sharply beveled under 45 degrees of the edges of the panels)
  • U-shaped (young kind of chamfer with soft rolling, occurs on expensive laminate brands and Chinese brands)

V-Fashionable Laminate - Description

The V-shaped groove can be deep, with a beveled edge up to 3 mm and have a slice slight, less than 1 mm inherent in some types of laminate. Visually both options look interesting.

Laminate with chamfer or without, better and more reliable

Floor coatings are released from the spot two or four sides. The first option involves the effect of a single board. However, a 2-sided chamfer came across extremely rarely, and the selection of the drawing is not obvious. The fact is that there are a collection of laminate, where the ends of the boards on the decor coincide, differing only in the middle. But for the most part, the panels have about 10 types of drawing on the party and are decomposed in the packages randomly, demanding to show a certain time and effort to select the coincidence of the texture.

List of interesting articles:

The quadrilateral line on the laminate forms a half-end opinion on the customers about the flooring. Masters on the facing of the tile, most often, when working with porcelain stoneway, perform laying in half tiles.

Installation of panels can occur, by choosing the owner of the apartment, in 1/2, 1/3 and even 1/4 of the board, in addition to chaotic styling.

Laminated coating with a 4-third-sided bench - it is necessary to think about it in advance which way to put: chaotic or 1/2 (1/3) the length of the floorboard. Since the method of flooring in half of the board involves a greater consumption of material, the stock is required to take with a surplus.

Laminated parquet from the chamfer, with equal other, more expensive product compared to an analogue without a bevel. The cost increases due to the extra two operations in production: rubbing and painting.

  • A deep bench is made in production shops at machine milling equipment. When milling inexpensive and medium price categories of laminate brands, it is sometimes possible to detect the scales on the corners of laminated panels. The cable edge is inherent, mainly expensive brands.

Skol on the laminate chamfer

  • A man in one video of YouTube convincingly says that the chamfer is covered with hydrphobic paint or acrylic composition in the color of the upper layer. Probably, on premium laminate stamps, this corresponds to reality. But after spending a fresh trial on Brndes: Classen and Kronospan found out that the paint on the edge darkens and pecks from friction with a damp cloth. Staining and lacquering on wood, as you know, raises the pile. It did not exception the laminate of these brands. The chamfer on the class and the crown turned out to be rough to the touch.

The V-shaped section is inherent in only a laminated parquet with a thickness of 8 mm to 12 mm and even rare 14 mm laminate. Thin panels cannot have a chamfer because of the minimum distance from the top layer to the puzzle lock and the lack of appropriateness to provide 6 or 7 mm cheap laminate with additional expensive options at all.

Buying a laminate with a V-Fashionable Faist Try to consider on your own or ask the sellers in the store to tell about the skos. If financial capabilities allow, it is better to purchase laminate with laminated V-Fame.

What a laminate is better with the fabrication or without - the opinion of the specialist

Pros and cons of the V-shaped chamfer

The chamfer besides the decorative value has a masking effect. With existing floor irregularities, poor geometry of planks (the more often the manufacturers of inexpensive laminate are sinned) microcomasures are formed between the panels. The presence of a beer face successfully hides them subject to suitable color of laminated boards. The appropriate color is in the range of gamma from light brown to dark, almost black shades.

Skos color can darken from abrasability, washing the floors. Therefore, the most successful laminate color in all respects is an oak, which coincides with a shade with natural, natural Color of the HDF-slab, on the basis of which it is made. On dark colors of defects are also not visible.

However, light laminated floors without a V-chamfer also need to be checked with knowledge of brands and caution. Faceless laminate emphasizes the inaccuracy of the geometry of the planks, especially in white tones.

Laminate consisting of vegetable fibers, like wood during humological temperature changes (inclusion, heat off) is subjected to narrowing and expansion. Such oscillations consistently lead to voltage in the lock connections and the formation of the slots.

In slotted gaps, moisture falls during a wet cleaning - the lock and the edge expands, the water pairs dry up - the lock connection is narrowed, becomes in place. It happens on the long process of wear of the clutch with the time of geometrically accelerating.

Laminate EGGER 33 class, service life of 8 years

Laminate EGGER 33 class, service life of 8 years

The presence of facility directly to this physical natural wear does not affect, but masks a defect and extends the life of the edge of the board. In the battle-free version of the edge of the panel from absorption moisture begin to raise. The vulnerability of the repellent edge is obvious - the fastest fusion, damping dice and the wear of the edge.

Difficult when collecting outdoor canvas with edges to make sealing seams by a sauce. This sealant or analog is hardly removed, it is difficult to do this from the chamfer.

Edit 2019. Now a large number of sealants are well removed immediately. These formulations contain volatile compounds and are based on silicone. However, they are pretty caustic. Here is a link to the article

Impact on the complexity of laying of laminate, the presence of a bevel at 45 degrees does not represent. Rather, on the contrary, 5G locks are in the groove easier, minimizing the ability to break the edge.

U-shaped chamfer - description, advantages, disadvantages

U-shaped chamfer is Nova. The idea consists in a gradual scope rounding to the edge of the board without degraving the bearing plate on the edge. Planck, thus, has a one-piece surface structure of the protective and decorative layer. The type of board is manufactured in a single-band version and with imitation under artistic parquet, tile.

With a high-quality product, this type of vending can last as long as possible. The melamine protective layer is the best hydrophobic coating, rather than acrylic paint. Possible abrasion and deterioration of the appearance, bevelled under 45 degrees of the edge of the laminated canvas.

This type of chamfer is inherent in expensive collections of famous laminate brands: Quick-Step Impressiv 8 and 12 mm. Usually, the thicker the laminated bar, the naturally looks like a drawing and externally imitates a roughly planed board. A decorative appearance of such a performance is now very popular and practical, as it masks all sorts of damage and scratches on the surface. It is noteworthy that the manufactured board in the matte variant doubles the concealment of various defects.

Chinese manufacturers are not lagging behind European colleagues and produce laminate with U-shaped chamfer. The Asian product looks great. But the quality of execution is lame. The most common inaccuracies concern the difference in the edge of the faces in height. The mismatch of the edges leads to the latter of the unprotected part of the plate. The result of this marriage becomes the imminent possible edge or swelling of the slab in this place. Laminate produced in the People's Republic of China suffers from some more defects, but about it in more detail in another article.

The laminate flooring with the U-shaped chamfer can be carried out both by chaotic way and in 1/2, 1/3 of the panel. Based on the type of laying, it is required to take a certain stock of the material. Any complexity or secrets of the chamfer in the installation floor does not add.

Laminate without chamfer

Farmeless design of the laminate is carried out on most products manufactured in Russia. As a rule, the absence of a beads is included in an inexpensive category of laminated floors. From this, however, it does not become less popular and is an alternative to linoleum.

Currently 2019-2020, the V-shaped chamfer is not considered to be solid and produced at most factories producing products in Russia.

Laminate without chamfer is produced in the form of two-band, three-band and single-laminated boards. The plank with two and three stripes imitates the size of the picture piece parquet, perfectly masking the line of docking. The products currently correspond to the trend and execution finds mainly in low-cost collections of laminated floors. The price of laminate without chamfer begins approximately from 120 rubles / m2.

A single-band saw is made in different price segments, corresponding to tastes of almost any category of citizens. And if the three-track option is published with simple design, without refined texture, moisture protection of locks and other bells. That single-band type of laminated boards collects all the advantages of modern floor making technologies.

Review Masters about Laminate with chamfer and without chamfer, what is better?

Laminate without chamfer:

  • Price of laminate. Products on the action begins to cost from 150-200 rubles / m2.
  • Comparison of similar grades in quality from the chamfer and without - the cost of about 50-150 rubles / m2. We consider inexpensive brands whose cost is about 500-600 rubles / m2.
  • The ability to perform flooring with the sealing of the castle by any compositions presented in the market.
  • In an inexpensive category, perhaps, faster wear of the upper coating layer.
  • Stamps up to 500 rubles / m2 in the corners of the slats sometimes have chips.

Laminate with V-Grand:

  • Moderate cost, from about 550 rubles / m2.
  • Excellent masking of gaps in medium and dark colors and insignificant in white.
  • Fashion trend on products with chamfer, excellent imitation for an array.
  • Serious difficulties perform seams of seams when laying.
  • Cheap categories of laminate sin with quality and handling of the face.

Laminate with U-Skose:

  • High cost of products, I find it difficult to answer exactly, approximately rubles from 1200 per m / 2
  • Cheaper options, most likely Chinese production - bad quality. There is a chance to come across them, as the laminate with the Middle Kingdom is often issued for European. It is better to take proven laminate brands.
  • Fully corresponds to a modern look at the design.
  • Castle sealing is most often not required, due to its execution in the factory.

I hope, it is for the choice of laminate with a chamfer or without chamfer, which they are better and suitable for you - it will be useful. If there are any questions, ask them in the comments.

In individual elements of the flooring made of natural wood, the angle formed by the front surface of the board and the side edge often miserably. The chamfer allows you to make gaps between the floorboards, inevitably arising from drying wood, less noticeable.

Laminate - material largely synthetic, so the drying problem here is not so acute, but sometimes the chamfer is applied to it. Its main purpose in this case is to make an artificial floor covering even more similar to natural. The lamellas adjacent to each other something resemble linoleum, they create a sense of monolithium, emphasize artificiality. The chamfer, visually separating the planks from each other, allow you to better imitate the boarding coating.

How does the appearance of this decorative element affect the operational characteristics of the laminated flooring? What laminate is better - with or without a fan or without? Answers to these questions can be found only by analyzing the advantages and disadvantages of both types of coverage.

Laminate with the fabrication or without which it is better to lay

What is the chamfer from laminate

The beveled edges of the laminate of different models may differ. First of all, it concerns their shape and size.

The chamfer may be a direct, made at an angle of 45 °, or curly, rounded. In the first case, a V-shaped excavation is formed when dospecking two lamelters, in the second - U-shaped. The U-type gives a board some convexity, volume, but it occurs less frequently than the V-type.

V shaped laminate chamferLaminate with V shaped faceted.

U Obraznaya Faska.Laminate with U-shaped faceted.

The magnitude of the formed deepening chamfer is divided into small (1-2 mm and less) and deep (over 2 mm). The depth of U-shaped recesses usually does not exceed 2 mm, in V-shaped it can reach 4 mm. Microfasics are used for easy designation of the edges of the lamella, deeply discharge the boundaries. In addition, there are chamfering with increased relative to the standard wide, which is achieved by an increase in the cutting angle.

The chamfer can be applied as soon as two long sides of the lamella and all over its perimeter. The boards with a double-sided chamfer visually lengthen the room, creating the effect of a wooden deck of the ship.

Fabrics along the boards

Each lamella with a four-sided chamfer is distinctly contacted, which enhances the similarity with natural board coating.

Fame of the perimeter of the boards of laminate

Faced chamfer can also according to the technology of applying. If the products made of natural wood are made by milling, then for the laminate, the rolling method is more acceptable - squeezing the edges when rolling on a special machine. When rolling, the protective laminated coating is preserved, and the edge of the board is made more dense than its middle, which is an indisputable advantage of this technology.

The reliability of laminate with milled edges depends on the method of its final processing: the chamfer can be simply painted into the tone of the product (a cheap finish option) or illuminated (more expensive processing method at which the protective layer is restored damaged during milling).

The type of chamfer has no practical value - the choice in this case should be done, based exceptionally to your aesthetic preferences. The main thing is that all production technologies be complied with it, and its surface was reliable.

How the chamfer affects the wear resistance of the laminate

In the chamfer area, the board is sophisticated, so you can expect that such a laminate will be more sensitive to the loads. However, it should be borne in mind that the decorative section of the edge is not made on the panels thinner than 8 mm - usually it is products, the thickness of which is not less than 10-12 mm. The depth of the chamfer relative to the total thickness of such a board can be considered insignificant, and therefore, and it should not have a special influence on the strength of the laminate.

The greatest strength is the tasted chamdes, since the compressed material acquires an increased density, but in a similar way, the edges are treated with only the non-sowing laminate produced by the famous companies. An ordinary edge edge that does not have a protective coating, and simply painted under the color of the board, has reduced strength.

The tests conducted by manufacturers confirm that with the thickness of the lamella 10 and more millimeters, the strength characteristics of the laminate with the facilities and without coincide, with a smaller thickness of the usual laminate turns out to be stronger. Freak with sharp edges looks more effectively, but at the same time it is susceptible to faster wear - its edges Instantly erased. If you have the ability to choose, give preference to laminate with a rounded chamfer.

What laminate is more moisture-resistant - with chamfer or without

Often, sellers of specialized stores and mastster-finishing do not advise not to lay laminate with a chamfer in the kitchens and in other rooms where the risk is grown to the floor. At the same time, the argument, as a rule, is given one: due to the presence of the chamfer, the area of ​​contact of laminate with water increases. In fact, taking a roulette and a calculator into the hands, you will quickly come to the conclusion that the chamfer increases the area for no more than 1-2%. Agree, not too much so that for the sake of this to start the conversation. However, the proportion of truth in the recommendations of specialists is.

In fact, the problem is not so much in increasing the area of ​​contact with water, how much is that spilled by the floor and not wiped in a timely liquid on a flat flat surface forms a thin layer, which means that it evaporates much faster than from the recesses formed by the chams which will ultimately become a zone of start of destructive processes. It follows from this that it is enough to observe a simple rule: you should not pour water to laminate, but if it happened, immediately wipe it.

The moisture resistance of laminate with the chamfer is largely determined by the latest quality. If the beveled edge, like the entire front surface of the panel, is illuminated and processed by water-repellent composition, it is not a vulnerable place.

However, such high quality, as a rule, can boast only the products of well-known brands produced in compliance with all technological regulations. The cheap laminate (in most cases of Chinese production) the chamfer is simply painted, and it does not have a protective coating. Of course, there will be no good water resistance and a long service life of such a laminate.

Kitaiskii Laminat.Laminate with non-laminated chamfer.

Thus, if you are presented with high-quality laminate and follow the rules set forth in the care manual for laminated surfaces, then with the champper, he or without - does not play a special role.

What difficulties arise when harvesting laminate with a chamfer

Most buyers who refuse to acquire laminate from the fairy and preference to the usual, motivate it with their concerns that the grooves between the straps will be clogged with garbage and mud. Practice shows that these fears are in vain: the grooves formed when laying such a laminate, in fact, not so great, dirt and dust accumulate there are not in a larger volume than on a smooth surface. And if the edges are processed with water and dirt-repellent compositions, then the problem is altogether somewhat contrived.

The absence of any difficulties are confirmed by people who have experience in cleaning both types of floor coatings. In their opinion, it's really more difficult to sweep the broom of the laminate. But with dry cleaning using a vacuum cleaner or a wet cleaning with a mop with a good nozzle of a special difference between laminate with a chamfer and without them did not notice.

Laminate Cleaning

The question of scoring mud facets can be relevant only in the most problematic sites - in the hallway and in the kitchen. To prevent it, it is enough just to clean the cleaning in these premises.

Creates a chamfer of difficulty when laying a laminate

There is an opinion that laminate with fame is easier to pretend, since it allegedly hides all the errors and irregularities, which means that you can not really try, leveling the foundation of the floor. In fact, the requirements of the manufacturers to the base under the laying of laminate with the advent of chamfer do not change - it should be rigid, clean and dry, and irregularities should not exceed 2 mm on the trafficphone meter.

Of course, the chamfer will visually slightly shortly associated with the irregularities of the black floor of the height differences between adjacent boards, but it will not save on the locks on the locks. Failure to comply with the rules of laying will lead to the fact that the locks quickly break, and the speakers in the height of the boards are premature.

Laying of laminate with fist

In general, the technology of laying laminate does not depend on whether it is or without a chamfer. No additional difficulties when installing this decorative element does not create.

What flaws can hide the chamfer and how it affects the appearance of the floor

What is needed by the laminate of the chamfer, if it is insignificant, but worsens the operational characteristics of the outdoor coating? Exceptionally as a decorative element. First, we have already mentioned this, she gives laminate similarity with natural flooring - a piece parquet or massive flooring. Secondly, laminate with a chamfer will help visually increase the room in which it is laid.

In addition, the beveled edge of the panel allows you to hide minor floor defects. True, in this regard, the possibility of laminate with the favoray, as a rule, is somewhat exaggerated.

Micron gaps at the joints of the panels, especially well noticeable on light coverage, the chamfer is really able to disguise. Over time, as the castle compounds weaken during the operation of the laminate, the gaps will increase, standing out and stronger and stronger. If their value does not exceed the fraction of a millimeter laid down in admission to high-quality lock connections, the chamfer will help to make this problem area with a little careful, as it focuses on the isolation of each board. Thanks to this, your laminate will look like a new one for a long time.

However, it is stupid to hope that the chamfer will help get rid of problems associated with laying laminate on an unprepared base. Of course, it visually smoothes height drops slightly in neighboring lamellae, but from an increased load on the locks caused by the roughness of the draft floor, and from the formation of cracks, which, as a result, early or later appear, will not protect any way. Regardless of whether or without the fated laminate, it is better not to rely on perhaps when it is laying. Remember that the chamfer is designed to perform a decorative function, and not to hide defects at all.


Thus, there are no significant differences in the operational characteristics of the laminate with the chamfer and without such. The chamfer is only a decorative element, so when choosing one or another type of laminate, you need to be guided solely by your own preferences, as well as the style in which the interior is made. However, that the result does not disappoint you, you should give preference to high-quality products of solid manufacturers that do not save on the chamfer processing.

If you have noticed an error, not a working video or link, please select a text fragment and click Ctrl + Enter. .

Laminate with chamfer or without: What is better?

Laminate is one of the most versatile and reliable flooring, which is widely popular. Before purchasing such a coating, you must first decide: to purchase products from or without it without it. But in order to make the right choice, you need to know the characteristics of both options and their positive and negative features.

What is the chamfer?

Wooden products, including floor coverings, have the properties to dilute over time, which is why gaps can appear between individual plaque laminate or parquet. When such an outdoor coating diverges into separate elements, the gaps can rush strongly. This is especially true of skimmets with direct sides. Previously, the boards were tightly adjacent, and now they began to form clefts. The chamfer is such a move that allows you to make future gaps are not as noticeable.

The chamfer in many cases is made by manufacturers when creating a natural flooring, such as a parquet board and laminate. The chamfer allows not only to save you from obvious gaps, but also save some visual defects which could occur during panel handling. The chamfer lowers the risk of formation of chips in the event that the corners of the product will accounterate a load. A split corner on a laminate without chamfer will be more noticeable than on the opposite model.

The chamfer is such an element that changes significantly and transforms the appearance of the coating. He will make it more similar to natural woody. If the plank is tightly adjacent to each other and do not have irregularities and deformation, but, on the contrary, very straight and smooth, it clearly resembles fake wood. So you emphasize the artificial nature of the floor covering. And the chamfer makes every plank in its own irresistible and individualizes it. This means that such a decorative and functional element helps to simulate a board coating.

The chamfer makes the imperceptible to the weakening of locks and other fastenings of the laminate, therefore it extends its life and makes the appearance more elegant. In addition, it allows you to smooth out the unevenness of the floor or other deformations. Some believe that such a decorative element is even able to make the room more spacious, visually increase its area. A double-sided chamfer makes a room longer if the lamellas are laid along the long side of the room.

The quadrilateral option is able to make the room visually wider.

Laminate with fistal

Laminate with the chamfer, first of all, is distinguished by the presence of a minimum beveled slice on the edge. Thus, when you are placing the adjacent elements, the natural gap is formed between them, both between natural deformed powders. The laminate board with a chamfer is distinguished by its big thick. Thus, the usual model has a thickness of 8-9 mm, and the products with a chamfer in the thickness exceed 10 mm. Laminate with a fabric is several species.

  • Models with V-shaped fez . They have direct scope, which allows the junction to form a small groove in the form of the letter V. The depth of such a slit is insignificant and is less than 3 mm.
  • Models with U-shaped chamfer . In this case, the chamfer is more rounded, and the same form has a separating line between two adjacent powders. So, the slot becomes more imperceptible, but at the same time very natural. Its size does not exceed 2 mm. As a rule, the chamfer is bilateral, that is, it is used for two opposite sides of each plate.
  • Laminate board with a chamfer around the perimeter, that is four-sided . Such models are more expensive and unusual. A feature of the chamfer on the laminate is that it does not mask the gap between adjacent elements, but on the contrary, makes it more noticeable and natural. That is why such an outdoor coating looks more expensive and luxuriously. But it is as close as possible to natural, milking.

The chamfer covers most often varnished or special film. Thus, it looks more elegantly, and it extends its life.

Laminate with the fma is placed only if the room is in the room the normal level of air humidity, otherwise the coating will change its appearance for the worse.

Laminate without chamfer

Such a coating is perfectly suitable if you decide to create a smooth smooth floor covering with a holistic structure. He is smooth and very pleasant to the touch and is universal. Such covers can simulate not only wood, but also other materials, such as stone, marble, granite and many others. These are more interesting in the appearance of the product, when creating a bet is made not to approach natural wood, but to the decor of such a laminate.

Very often there is a light laminate without chamfer, which is used as an alternative to a parquet board. It is perfect for the classic interior design. Standard laminate most often happens in brown, beige and cream shades. Such models are universal and are suitable for any interior style.

Any laminate after its laying has a property with time a little ride. So, in places of joints of the seams become noticeable. But the slots are very narrow, in some cases the distance between them does not exceed and half a millionth. Externally, they may be invisible, but such a lack can affect the quality characteristics of the material: moisture, dust and dirt can fall into the slot.

In addition, the mechanical influences of the edge can wear out and then chips can even appear.

How to choose?

Choosing a laminate with both the fabrication, and without, it is important to pay attention to his class. The most reliable are products of the 31st, 32nd, 33rd class. They are very resistant to abrasion, so they will be invisible traces of mechanical impacts. In addition, they are very durable and flexible, and also have reliable latches. That is why such products are often produced without chamfer. This causes that in some cases, with proper care, the gaps do not appear at all over time, and therefore the chamfer loses its functionality.

In addition, the role of the champers can perform a special substrate. It will make the floor covering more reliable and minimizes the possibility of cracking and cracks. Laminate with the fabrication can be put at any time and in an absolutely any room, except in cases where it is very wet.

So, the models are not perfectly the right form better lay in residential rooms, such as living room, bedroom, children's.

Models without chamfers are better stacked in rooms such as toilet, bathroom, hallway. It is very versatile and resistant to the effects of moisture and dirt, it is much easier to care for it. Thus, his main difference is that it is practical. But Laminate with a chamfer can be put under any temperature conditions . The opposite option has a number of laying conditions. Thus, simple smooth models in no case cannot be laid in case of a long time in a room with an increased or reduced temperature. First, they need to be made to that room, where they will be subsequently laid, and wait about 12-36 hours so that the coating is acclimatized and did not give strain.

Disadvantages of laminate with fist: myths and reality

Many believe that laminate with the favry is not very practical in use. So, there is an opinion that small gaps will collect all the dirt and dust. But in fact, these gaps are so small that they are practically not noticeable, and the dust does not fall into them. In addition, special dirt-repellent means will help to cope with this problem.

Also, many think that water will fall there, and therefore the laminate with the chamfer from functionality will be similar to the coating without it. But impregnated with a water-repellent composition with a chamfer is more durable and reliable than models without it. Some buyers also indicate that laminate with the fairy school is not very practical, since dry cleaning is rather difficult. That is, care for it is more complicated than the usual smooth and even laminate.

But for such a coating, you can use a vacuum cleaner or a wet cloth.

It is believed that in the humid premises of the model from the fabric it is categorically impossible. But it is not so. There are special lamellas that are made of very strong materials with high resins and fixed with reliable locks. Thus, the chamfer is fully protected, water does not penetrate into it at all. In addition, many manufacturers represent models that are already treated with water-repellent means.

Another myth is that since the models with the faustr have uneven edges, then when exposed to physical and mechanical factors, the likelihood of cracks and chips increases on these elements. Thus, these models are more fragile. But this is not quite the case, since the chamfer applies only if the laminate is durable, and its thickness is more than 10 mm. Thus, the depth of chamfer is extremely insignificant, compared to the thickness of the entire product and therefore the impact on this point will not affect the external qualities of the lamella.

There are products with a walsified chamfer, which is distinguished by the strength of all edges of the board. In such places, materials in the manufacture of laminate are very pressed, and thus it becomes more dense. The final stage in its creation is a special protective impregnation. Thus, if in the manufacture of such a model, high-quality modern technologies were used, they can exceed the model without such decorative design. But if the lamellae is not processed by a protective coating and only painted with simple paint or varnish, then their waterproof and protective properties decrease greatly.

Thus, the life of this product is reduced.

Another myth is that the model from the fabric is much more difficult to lay and dock. But it is incorrect. They have the same attachments and locks as the classic models of lamellas. That is why they can be easily and quickly putting at home on their own without much effort and assistance. It should be noted that the laminate with the Fame is more expensive than the models without it. Recent options are quite budgetary and suitable under any wallet.

If you put the laminate on the already ready aligned base, it does not matter which coverage you will prefer. In this case, it is not necessary to repel not from qualitative characteristics, but from the appearance of such a product and on your personal preferences. In this case, it is important to take into account the style of the interior in which the room is completed. Then the chamfer only will perform the role of a decorative element.

Read more about Laminate with the fabric you will learn from the following video.


Добавить комментарий